Nov 21, 2005  Za BDS naistina niama nujda ot kirilizator. I az polzvam Windows 98, no frenska versia. V nachaloto opitah da instaliram Flex Type, no ne se haresaha s Windows-a, sbiha se i ostanah bez operatsionna sistema. Reshih, che bez kirilizator moga, no bez Windows - ne. Dostatachno e v Control panel da dobavish balgarski kam ezitsite na klaviaturata. Windows 98 would probably work best. 95 is buggy as heck and ME. Well, you could say it is the child of 9x and NT, since it runs a modified version of dos designed to only be able to boot the os.

A /dev directory containing a special file for all devices to be used by the system is mandatory for any Linux system. The directory itself is a normal directory, and can be created with mkdir in the normal way. The device special files, however, must be created in a special way, using the mknod command. There is a shortcut, though — copy devices files from your existing hard disk /dev directory.

Download Lennox whisper heat furnace troubleshooting manual.pdf. Please help to find the training I need? Best Answer: I'd imagine the course you are taking will have a brief introduction to the Nexxsys software. CNET Download.com provides free downloads for Windows. Choosing the best Running Windows games smoothly Choose the best antivirus software. Hand Gripper Training Manual Pdf - The best free software for your. Heavy Grips Hand Gripper Training Manual Place the hand grip against the palm of you hand. Has 'Nexxsys Training Manual' for download. Their software in exchange for a free. Top 4 Download periodically updates software information of training manual full versions from the publishers, but some information may be slightly out-of-date.

The only requirement is that you copy the device special files using -R option. This will copy the directory without attempting to copy the contents of the files. Be sure to use an upper case R. For example: cp -dpR /dev/fd[01]* /mnt/dev cp -dpR /dev/tty[0-6] /mnt/dev assuming that the diskette is mounted at /mnt. The dp switches ensure that symbolic links are copied as links, rather than using the target file, and that the original file attributes are preserved, thus preserving ownership information.

If you want to do it the hard way, use ls -l to display the major and minor device numbers for the devices you want, and create them on the diskette using mknod. However the devices files are created, check that any special devices you need have been placed on the rescue diskette. For example, ftape uses tape devices, so you will need to copy all of these if you intend to access your floppy tape drive from the bootdisk. Note that one inode is required for each device special file, and inodes can at times be a scarce resource, especially on diskette filesystems. You'll need to be selective about the device files you include.

For example, if you do not have SCSI disks you can safely ignore /dev/sd*; if you don't intend to use serial ports you can ignore /dev/ttyS*. If, in building your root filesystem, you get the error No space left on device but a df command shows space still available, you have probably run out of inodes. A df -i will display inode usage. The /etc directory contains configuration files. What it should contain depends on what programs you intend to run. On most systems, these can be divided into three groups: • Required at all times, e.g. Rc, fstab, passwd.

• May be required, but no one is too sure. • Junk that crept in. Files which are not essential can usually be identified with the command: ls -ltru This lists files in reverse order of date last accessed, so if any files are not being accessed, they can be omitted from a root diskette. On my root diskettes, I have the number of config files down to 15. This reduces my work to dealing with three sets of files: • The ones I must configure for a boot/root system: • rc.d/* -- system startup and run level change scripts • fstab -- list of file systems to be mounted • inittab -- parameters for the init process, the first process started at boot time. • gettydefs -- parameters for the init process, the first process started at boot time. • The ones I should tidy up for a boot/root system: • passwd -- Critical list of users, home directories, etc.

• group -- user groups. • shadow -- passwords of users. You may not have this. • termcap -- the terminal capability database. If security is important, passwd and shadow should be pruned to avoid copying user passwords off the system, and so that unwanted logins are rejected when you boot from diskette. Be sure that passwd contains at least root. If you intend other users to login, be sure their home directories and shells exist.

Termcap, the terminal database, is typically several hundred kilobytes. The version on your boot/root diskette should be pruned down to contain only the terminal(s) you use, which is usually just the linux or linux-console entry. They work at the moment, so I leave them alone. Out of this, I only really have to configure two files, and what they should contain is surprisingly small. • rc should contain: #!/bin/sh /bin/mount -av /bin/hostname Kangaroo Be sure it is executable, be sure it has a '#!' Line at the top, and be sure any absolute filenames are correct. You don't really need to run hostname — it just looks nicer if you do.